Doll crochet. The Work Of Alexandra Yankovskaya

Кукла крючком. Работа Александры Янковской вязание и схемы вязания

DOLL CAPE WITH HOOD

This master class is free and designed for free distribution and use. The resulting describe a toy you can dispose of at their discretion.

Thank you and enjoy your knitting :-)

INTRODUCTION

The difficulty level of the master class is simple, i.e. easy to handle even for a beginner knitter. To tie a toy on this description, you need to know how are performed:

1. Ring amigurumi (or magical, moving, magical ring)
2. The columns without nakida
3. Columns with one nakida
4. Air loop
5. Obuvki
6. Gain

You will need the following tools:

1. Yarn, Golden Sun, 100% cotton, hint of milk
2. Yarn, Golden Sun, 100% cotton, shade of gray
3. Jarn yarn Art Jeans, 55% cotton, 45% acrylic, shade of pink
4. Hook №1,75 hook №2,5
5. Marker to denote the beginning of the series
6. Eyes-polybutene
7. Button and thread for her sewing
8. Wire (if you want to make skeleton doll)

Using the above materials and tools your doll will be approximately 19 cm

Legend:

SC ‒ column without nakida
с1н – column with one nakida
VP ‒ air loop
KA ‒ ring amigurumi
UB. ‒ twist (provarite along two loops, taking their front wall)
other ‒ increase (provarite two columns instead of one)

All items are knitted in a spiral.

Step 1. LEGS – BODY

Use yarn milk color.
1. 6 SC in the SC = 6 SC
2. so each loop = 12 SC
3. [1 SC, 1 St.] x6 = 18 SC
4. [2 SC, 1 St.] x6 = 24сбн
5. SC 24 back loop
6 ‒ 8 (3 rows) = 24 SC
9. 8 SC, 4 FM 8 SC = 20 SC
10. 8 SC, 2 UB, 8 SC = 18 SC
11. 8 SC, 1 UB, 8 SC = 17 SC
12 ‒ 17 (6 ranks) = 17 SC
18. 1 Ave., 16th SC = 18 SC
19 ‒ 21 (3 rows) = 18 SC
22. 1., 17 SC = 19 SC
23 – 25 (3 rows) = 19 SC

The knitting of the leg ends; the thread should be cut, to fix and hide.

Tie the second leg on the same scheme.

Then attach the thread to one leg, proverite 5 EAP and attach the second leg so that the socks looked a little inside. Next, associate 19 SC along the perimeter of a foot, 5 SC at "bridge" out of the stitches, then SC 19 on the perimeter of the other leg and 5 PRS again at "the bridge". A total of 48 SC around the perimeter of both feet.

Thus you get a number that connects both legs. It is the first row of the BODY.

2. [11 SC, 1 St.] x4 = 52 SC
3 ‒ 4 (2 rows) = 52 SC
5. [12 SC, 1 St.] x4 = 56 SC
6 ‒ 18 (13 ranks) = 56 SC
19. [12 SC, 1 UB.] x4 = 52 SC
20. 52 SC
21. [11 SC, 1 UB.] x4 = 48 SC
22. 48 SC
23. [6сбн, 1 UB.] x6 = 42 SC
24 – 26 (3 rows) = 42 SC
27. [5сбн, 1 UB.] x6 = 36 SC
28. 36 SC
29. [4сбн, 1 UB.] x6 = 30 SC
30 – 31 (2 rows) = 30 SC
32. [3сбн, 1 UB.] x6 = 24 SC
33. 24 SC

The thread is cut, attach and hide. Now it's time to fill the detail of the "foot-body" filler.

Step 2. HEAD

Use yarn milk color.
1. 6 SC in the SC = 6 SC
2. so each loop = 12 SC
3. [1 SC, 1 St.] x6 = 18 SC
4. [2 SC, 1 St.] x6 = 24 SC
5. [3 SC, 1 St.] x6 = 30 SC
6. [4 SC, 1 St.] x6 = 36 SC
7. [5 SC, 1 St.] x6 = 42 SC
8. [6 SC, 1 St.] x6 = 48 SC
9. [7 SC, 1 St.] x6 = 54 SC
10. [8 SC, 1 St.] x6 = 60 SC
11. [9 SC, 1 St.] x6 = 66 SC
12 ‒ 22 (11 ranks) = 66 SC
23. [9 SC, 1 UB.] x6 = 60 SC
24. [8 SC, 1 UB.] x6 = 54 SC
25. [7 SC, 1 UB.] x6 = 48 SC
26. [6 SC, 1 UB.] x6 = 42 SC
27. [5 SC, 1 UB.] x6 = 36 SC
28. [4 SC, 1 UB.] x6 = 30 SC
29. [3 SC, 1 UB.] x6 = 24 SC

The knitting head ends. Cut the thread, but don't forget to leave a long end for sewing head to body. Stuff the head with fiberfill.

Step 3 (optional). EARS

Use yarn milk color. Select the spot on the head of your doll where you have decided to knit the eyelet. When making my dolls I usually am guided by the same number, which is the eyes – I have it around 17-18 to the top.

Then attach the thread to one of the loops. Dial a chain of three loops and using SC or connecting column attach it right under the loop where you attached the thread.

The result: you get a small arch.

Hide the ends of the threads and in the same way, not forgetting the symmetry, adorn the head of a doll the ear on the other side.

Step 4. HANDLE

Use yarn milk color.
1. 6 SC in the SC = 6 SC
2. so each loop = 12 SC
3. [1 SC, 1 St.] x6 = 18 SC
4 – 5 (2 rows) = 18 SC
6. [1 SC, 1 UB.] x6 = 12 SC
7 – 33 (27 rows) = 12 SC

Fill hand brush filler. Insert the wire frame, if necessary, and stitch the edges with SC. Cut the thread with the stock below its length was enough to sew arms to body. Similarly, the second link arm.

Step 5. HAIR

Use yarn grey shade.
1. 6 SC in the SC = 6 SC
2. so each loop = 12 SC
3. [1 SC, 1 St.] x6 = 18 SC
4. [2 SC, 1 St.] x6 = 24 SC
5. [3 SC, 1 St.] x6 = 30 SC
6. [4 SC, 1 St.] x6 = 36 SC
7. [5 SC, 1 St.] x6 = 42 SC
8. [6 SC, 1 St.] x6 = 48 SC
9. [7 SC, 1 St.] x6 = 54 SC
10. [8 SC, 1 St.] x6 = 60 SC
11. [9 SC, 1 St.] x6 = 66 SC
12 ‒ 19 (8 ranks) = 66 SC

It's time to tie the curls. To do this, without tearing the threads, dial twenty-loops, do two loops of the instep and provarite in two columns with one nakida in each air loop – a total of forty-one columns with nakida. Then use the connecting bar attach the curl to a cap of hair.

Repeat as many times as curls want to link to (I have three). If you want your doll had long hair, then make a chain of air loops longer.

Once you have linked the curls on one side of the head and attached them to the hood by means of a connecting column, decorate the doll's head forehead. From where you finished crocheting the curls, proverite following rapport:

[1 SC, skip 2 SC, 6 SC in next loop, skip 2 SC] x5

In that place, which ended with a fringe, again knit curls. We thus took shape hairstyle doll -- you only have to sew it to the head!

Кукла крючком. Работа Александры Янковской вязание и схемы вязания

Step 6. CAPE

Use yarn pink hue. Knit columns with one nakida.
Dial a chain of 24 VP and make two loops of the instep.

1--2 (2 rows) = 24 с1н
3. [1., 1 с1н] x12 = 36 с1н
4. [1., 1 с1н] x18 = 54 с1н
5 – 6 (2 rows) = 54 с1н
7. [8 с1н, 1 St.] x6 = 60 с1н
8. 60 с1н
9. [9 с1н, 1 St.] x6 = 66 с1н
10 -11 (2 rows) = 66 с1н

Tie the edge columns without nakida, make a loop and sew a button. Hide all the ends of the threads.

Tie the hood. Still use yarn pink hue. Knit columns with one nakida.

1. 6 с1н KA = 6 с1н
2. 6 с1н
3. so each loop = 12 с1н
4. 12 с1н
5. [1 с1н, 1 St.] x6 = 18 с1н
6. [2 с1н, 1 St.] x6 = 24 с1н
7. [3 с1н, 1 St.] x6 = 30 с1н
8. [4 с1н, 1 St.] x6 = 36 с1н
9. [5 с1н, 1 St.] x6 = 42 с1н
10. [6 с1н, 1 St.] x6 = 48 с1н
11. [7 с1н, 1 St.] x6 = 54 с1н
12. [8 с1н, 1 St.] x6 = 60 с1н
13. 60 с1н

Sew the hood to the Cape, thread, trim, hook and hide. Make a pompon of any size, using white, gray and pink yarn, sew it to the tip of the hood.

Step 7. ASSEMBLY

1. Sew the head to the body.
2. Sew arms to the sides right under the head.
3. The position of the eyes between 17 and 18 rows head (read above). The distance between the eyes is about 10 PRS.
4. Embroider mouth.
5. Sew hair to head.
6. Dress up your doll in all the beautiful outfits (my dress and shoes), and as outerwear wear a Cape.

Yay! You did it! Good for you :-)

This is an automatic translation of the publication in Russian.

Post author

User avatar

Aleksandra Yankovskaya

7 posts since 2017

Переведено сервисом Яндекс.Переводчик

Работаю!